Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
Your VCR has an Energy Save feature which if set will place your VCR into an economic power save where the clock display will disappear. If you have programmed a recording, this feature
On Screen Display
will not work.
You may easily display the current time or tape counter and amount of tape left, day, month, year, day of week, programme channel, and operational mode of your VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. Press OK/CLK/CNT to display.
CLEAR
Energy Saving
Press POWER on the VCR.
Press POWER on the VCR again and your VCR will go into Energy Save. All indicators will turn off. Press POWER to switch off Energy Save.
POWER, REWIND, PLAY, FF and VCR indicators will light.
OK
i
CLK/CNT
PAUSE/
After 3 seconds the display will clear only leaving the clock or tape counter and amount of tape left on the TV screen. Press OK/CLK/CNT again to remove all displays from the TV screen.
CLEAR OK i
VCR Function
STOP SP
Channel Programme
BBC1
1.01.00 SAT
12:00
CLK/CNT
Day/Month/ Year/Day of Week
Clock/Tape Counter & Amount of Tape Left
PAUSE/
Press OK/CLK/CNT repeatedly to display the tape counter and amount of tape left. Tape counter and amount of tape left appear only while a tape is loaded.
24